If you don't have a spoiler, the Thule Passage # TH911XT will fit your 2014 Jeep Grand Cherokee. If you do have a spoiler, there is not Thule Option, BUT the Yakima HangOut # Y02638 will! To me, trunk mounted bike racks are pretty much the same in most cases, The HangOut is a great rack that has the same features and the Thule, just a bit different design. view full answer...
So, first, I can confirm for you that the Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 is a fit for your 2019 Jeep Grand Cherokee Altitude so you got the right hitch.
In regards to flexing, that is an unfortunately something that can occur during shipping, and an inch is certainly within the range of how much it can flex. It will take some elbow grease but it is something that can be remedied, and I've added a link below to a help article which has some details on how to go about... view full answer...
Curt uses a slightly larger collar around the receiver opening of their Class III hitches, so the # 63080 hitch anti-rattle device doesn't typically work reliably on hitches other than those manufactured by Draw-Tite.
I'd recommend the etrailer brand # e99007 Anti-Rattle hitch stabilizer which will work perfectly with the Curt # C13182 hitch you mentioned. view full answer...
Since your 2014 Jeep Grand Cherokee has the flush side rails with tracks, you will want the 53 inch WingBars. The complete rack consists of the bars, # TH711400 in silver or # TH711420 in black, the Rapid Podium Foot Pack, # TH460R, and the Fit Kit, # THKIT3142. You can also add the Thule One-Key Locks, # TH544, to secure your roof rack to your Jeep when you are away from the vehicle.
Then to add locks to the feet use the 4-pack of lock cores, part # TH450400. view full answer...
There sure is!
For a splice in kit you can use the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit # C59496 which includes everything needed to splice into the factory wiring on your 1995 Jeep Grand Cherokee Laredo without the factory towing package.
With that said there are plug in play harness like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118349 which will not require splicing as it plugs into factory connectors. view full answer...
Yes, the Curt Base Plate Kit # C58FR will work with the Blue Ox Tow Bars. You do not need any special adapters. I recommend the Blue Ox Ascent Tow Bar # BX4370 for your 2014 Jeep Grand Cherokee.
For the Tail Light Wiring Kit # C63CR will allow you to use the taillights on Jeep rather than using separate towing lights.
The Brake Buddy Select 3 # HM39524 is a convenient and small portable braking system that will work well for your Jeep. It folds down when not in use so that it takes up... view full answer...
My contact at Thule advised that their various rooftop cargo boxes (all can be seen on the link provided) do fit Thule's own AeroBlade load bars but will not fit on the wider and taller RhinoRack Aero bars. It may certainly be possible to modify the box and/or substitute different hardware but an easier and safer solution is to use a Rhino Rack brand cargo box.
The link provided will show you all Rhino Rack cargo boxes which range in capacity from 14- to 20-cubic feet. view full answer...
The Tekonsha Prodigy P3 # 90195 is a great brake controller that will work well with your 2017 Jeep Grand Cherokee. I've attached a video of the installation on a 2014 that will be very similar.
I verified with Tekonsha that the Plug-In Wiring Adapter # TK93VR will carry over from the 2016 to 2017 so it will plug directly into the wiring of your Jeep.
If you need a wiring harness to power the trailer lights you can use # 74682 which will provide a 4-way and a 7-way trailer connectors.... view full answer...
The Demco Tabless Base Plate Kit item # DM9519291 you were looking at comes with everything you need to connect Demco, etrailer, and Blue Ox tow bars to. It is custom fit for a 2018 Jeep Grand Cherokee. It fits all models including the Trackhawk and SRT-8. I am not sure what you mean by combo kits but there is no one option fits all for flat towing. You'll need to purchase multiple parts.
I have listed the rest of the parts you will need to flat tow your 2018 Jeep Grand Cherokee below... view full answer...
The replacement covers for the etrailer Invisible Base Plate Kit item # e98950 is Item # DM15675.
These are sold individually and replaces the protective cover for your tabless base plate. view full answer...
The Trailer Sway Control (TSC) on your 2021 Jeep Grand Cherokee Limited with the tow package will either apply an individual brake or reduce engine power to try and eliminate sway, but uses a separate circuit to do this so a trailer brake controller will not be affected.
You will have no issues using the Tekonsha Prodigy RF Wireless Trailer Brake Controller w/ Bluetooth - 1 to 3 Axles - Proportional # TK94FR while the TSC is active.
I included a video of the # TK94FR for you to take a look at. view full answer...
I reached out to my contact at Curt and confirmed that the Curt Trailer Hitch Receiver # C13065 you were looking at is confirmed to fit your 2015 Jeep Grand Cherokee Altitude With Dual Exhaust and I have included a picture of it installed on a customers Grand Cherokee with dual exhaust for you to take a look at.
The # C13065 has a 500lb tongue weight rating and 5000lb trailer weight rating, or 750lb tongue weight rating and 7500lb trailer weight rating when using a weight distribution... view full answer...
Yes, you can use the InvisiBrake, # RM-8700, on your 2011 Jeep Grand Cherokee. In order for it to work properly you will need to have a wiring system that taps into the vehicle wiring like # RM-154 and you will need Stop Light Switch Kit, # RM-751449. I have included a link to a video showing a typical installation of the InvisiBrake for you to view. I have also included some helpful links on flat towing for you. view full answer...
As far as mounting your 472-pound motorcycle along with the 52-pound Ultra-Fab Dirt Bike Carrier # UF48-979033 on your hitch rated for 500-pound hitch, you should definitely upgrade the hitch. This is because it is extremely dangerous to exceed the rated weight capacity of your hitch.
While we do have a great option for you, the only Class IV universal hitch we carry is specifically constructed to be used with service vehicles. That is the Buyers Products # 3371801053. For an option that... view full answer...
Thanks for the info!
Since your Rhino-Rack RVP Roof Rack # RRRVP27 has crossbars which end in the feet we need to get you a roof rack that has overhanging crossbars on your 2016 Jeep Grand Cherokee in order for you to fit the Thule Hullavator Pro # TH898. For this I recommend the Thule WingBar Evo roof rack setup as it's easy to use and setup plus it has a dual rubber insert for the top channel so you don't have to trim the rubber insert to install an accessory, like the Hullavator Pro,... view full answer...
Thanks for the picture! To flat tow your 2014 Jeep Grand Cherokee Limited with a Blue Ox tow bar you will want the Blue Ox Base Plate Kit item # BX1128. I have attached the instructions below along with an installation video so you can see how to get this part set up.
Some other parts you will need to flat tow your Jeep are listed below:
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Supplemental Braking System - Blue Ox Patriot Radio Frequency... view full answer...
If your 2008 Jeep Grand Cherokee had the factory tow package you would already have a 7-way at the rear of your vehicle, so you would know as that connector would already be there. The correct 4-way for your 2008 Jeep Grand Cherokee without the factory tow package is the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56009. view full answer...
The Thule Roof Cargo Basket, # TH859XT, is larger than your current roof basket, so to determine how this cargo basket will fit on your 2008 Jeep Grand Cherokee, I can provide you with some specs that you can use to determine how this basket will fit.
This cargo basket will fit crossbar spread of 20 inches to 37 inches. The crossbar spread is measured from the center of your front crossbar to the center of your rear crossbar. It is recommended to have the cargo basket centered over the... view full answer...
Since your 2020 Grand Cherokee does not have the tow package you will need two separate wiring harnesses to install a 7-way connector. The first harness you will need is the Curt T-Connector Vehicle Wiring Harness item # C62VR. This is custom fit and plugs into existing wiring behind your rear tail lights. It will provide you with a 4-flat connector.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7 or item # ETBC7L if you plan... view full answer...
The Draw-Tite 76432 which we sell as part # DT38MR is indeed a confirmed fit for the 2021 Jeep Grand Cherokee Trackhawk with the removable fascia panel.
If you'll be using the hitch for towing, you'll need a few other items to complete your towing system. If your vehicle is isn't equipped with the tow package, you'll use the # 118727 trailer wiring harness, a # 2753 ball mount and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. view full answer...
Go To Results